WhatsApp:+86 -1866 -5800-742 info@doitvision.com

4 Best COB or SMD P1.5 LED Display Screen

by | Apr 8, 2024 | Blogs | 0 comments

Are you looking for the P1.5 LED display? Do you know how to choose the different LED packaging technologies, what is the difference between P1.5 and P2 LED display? What is the best P1.5 LED video wall on the market? Next, the top LED display manufacturer-Doitvision will introduce them one by one.

What is P1.5 LED display?

R500 P1.5 LED display

P1.5 means an LED display with a pixel pitch of 1.5mm. In the industry, LED screens with a point spacing of less than 2mm are usually called small-pitch LED displays.

Comparison of P1.5 SMD and COB LED display

Here is quick comparison of P1.5 SMD and COB LED display:

FeatureCOB TechnologySMD Technology
ProcessChips are directly soldered onto PCB, then covered.Chips are packaged into beads, soldered onto PCB.
Image QualitySurface light source, less eye strain, higher contrast.Point light source, may cause more eye strain.
ReliabilityBetter protection (IP65), harder to repair.Less protection, easier to repair.
Energy EfficiencyLower power consumption due to direct chip placement.Higher power consumption due to wire obstruction.
CostHigher initial cost, fewer manufacturers.Lower cost due to mature technology, more manufacturers.

What is the difference between P1.5 and P2 LED display?

Here are the key differences between P1.5 and P2 LED displays:

FeatureP1.5 LED DisplayP2 LED Display
Pixel Pitch1.5mm2mm
ResolutionHigher because of more beads in the same areaLower because of fewer beads in the same area
StructureMostly uses cabinet structure for higher detailMostly uses module structure
Packaging TypeSMD orCOB (Chip On Board) for smaller pitch & stabilitySMD (Surface-Mount Device) traditional, cheaper but higher failure rate
PriceMore expensive due to finer operation and more beadsCheaper due to larger pitch and less detailed operation

Which is better? P1.5 displays are better for higher resolution and clarity. However, they are more expensive. It’s essential to choose based on your specific needs and budget.

List of Best p1.5 led display

#COB Series

cob led displays
doitvision cob led displays

Chip on Board also known as COB LED displays are LED formed by multiple tiny chips bonded to the substrate creating a single module.

DOIT VISION COB LED display offers an ultra-high resolution viewing experience. With COB (Chip On Board) technology, it achieves a smaller pixel pitch and higher pixel density, allowing viewers to enjoy a clear picture from close distances without seeing individual pixels. 

This advanced technology also produces unparalleled picture quality with a wider color gamut and truer-to-life images on a uniform black surface. The LED display has a wide 180-degree viewing angle and a super-high contrast ratio optimized for Full HD and Ultra HD content with a 16:9 aspect ratio. 

Its reliability is enhanced by waterproof, dustproof and anti-collision features to ensure long-lasting performance. Energy efficiency is another key benefit, with savings of up to 40% over traditional LED screens thanks to its flip-chip COB packaging and common cathode circuit design.

Features:

  • Smaller pixel pitch for close-up clarity
  • High pixel density for detailed images
  • Water-proof, dust-proof, anti-collision
  • Up to 40% energy savings
  • 180-degree viewing angle
  • High contrast ratio
  • True-to-life color accuracy
  • Easy installation with 100% front access and no need for installation brackets
  • Quick component replacement, ensuring effortless maintenance

#1R500 Series 1

R500 P1.5

R500 Series is specialized designed for rental applications that need minimum pixel pitches for applications of HD, 4K, XR, virtual production. also a LED panel works properly for camera. Pixel pitch have 1.5mm, 1.9mm, 2.3mm options. Panel size:500 x 500 x 67mm (W x H x D).

  • fast curve locking
  • Up to 7680Hz super high refresh rate
  • 16 bits grayscale
  • Hanging & ground stacking installation

#2Brick Series

Brick HD LED display

Brick series are specially designed for Indoor wall mounted installation, structure-free, 100% front service. There is full range of pixel pitch: 1.5mm / 1.8mm/2.6mm / 2.9mm / 3.9mm for one type of LED panel structure. LED modules are magnetic front service,100% front maintenance.

1. Creative shapes, can do 90-degree right angle. Flexible curve shape, cave & convex, cube

2. Perfect alignment & flatness

3. Can be installed on the wall directly without any structure.

#3FP Series

FP Series

Each unit case of FP series uses a 16:9 aspect ratio, the same most commonly used in displays for FHD and UHD content. This allows you to enjoy existing content without additional editing. It’s lightweight and easy to install, preventing damage during installation. A full set of LED screens is still lightweight, reducing strain on the structure holding the screens.

Features:

1. 16:9 per cabinet

2. Front maintenance

3. delicate colors and ultra-high contrast

#4FO Series

GOB LED Display

FO series is the minimum pixel pitch for outdoor applications with brightness of 4000 nits which can work understand sunshine and brings. And can be rental and fixed installation and can do GOB technology for protecting modules. There are three different pixel pitch P1.5mm, 1.8mm, 2.5mm options, panel size is 480x540x70mm,

16:9 Aspect Ratio Optimized for FHD/UHD Content.

Features:

  • 5000:1 high contrast ratio
  • Superior flatness
  • IP66 protection
  • Fast locking system

As we mentioned above there are many different P1.5mm . But what is the different are them? I think you must be very confused if you are a new one in this area. For better understand them, here is a liat to help you know them.

NOItemApplicationInstallationLED PackageCabinet SizeCabinet ResolutionBrightnessWeight (KG)Maintenance
1COBIndoorFixedCOB600mm x 337.5mm x 75mm400×225600nits8100% front maintenance
2R500 SeriesIndoorRentalSMD500mm x 500mm x 67mm334×334600nits9.5Front & Rear
3Brick SeriesIndoorDirect wall mounted installationSMD500×1000334×667800nits7100% front maintenance
4FP SeriesIndoorFixedSMD600mm x 337.5mm x 75mm400×225600nits6.5100% front maintenance
5FO SeriesOutdoorDirect wall mounted installationGOB480 x 540mm x 70mm320×3604000nits9.5100% front maintenance

By comparison, you will find that different series with different parameters. You can choose the best suitable for your project. Of course, we will recommend you if you need support, more details can contact DOIT VISION.

How Much Does P1.5 LED Display Cost?

The cost of a P1.5 LED display can vary significantly based on several factors. We introduced why these factors affect price. Here we will show the price difference based on size.

For example: P1.5mm indoor FP series

ItemScreen SizePrice (per sqm)Total AreaAmount (USD)
14.8 x 2.7 m240012.96 sqm31104
26 x 3.7 m240022.2 sqm53280

Notes:

  • “sqm” means square meter.
  • “m” stands for meter.
  • “Amount” is the total cost without including package and video processor.

In conclusion:

We introduce the guide for P1.5 LED display above. Whether you are used for fixed or rental use. Whether it is SMD or COB technology, our best P1.5 display screen collection always has one suitable for you. If you need it, please contact us.

About the Author

Kris Liang

Kris Liang

Founder/LED display expert

Kiris Liang is the founder of Doitvision. 12 + years in LED visual industry. Full passion of LED, product designer & chief salesman. Looking for teammate of technical/ marketing / sales.

Connecting people relative with LED displays.

Email: kris@doitvision.net