All-in-One COB LED TV 
Flexible LED Displays 
Transparent LED Displays 
Led Poster 
Circular LED Displays 
Creative & Custom LED Displays 
An outdoor LED display is a weatherproof LED video wall or billboard panel engineered for permanent fixed installation in open-air or semi-outdoor environments. Distinguished from indoor LED by high-brightness output (4,000–10,000+ nits), IP-rated enclosures (IP65/IP66), and operating temperature ranges covering extreme heat and cold. Common applications include roadside billboards, building facades, DOOH advertising networks, and transportation hubs.
- —Pixel pitch: P1.2–P10.41 (fine pitch to large-format billboard)
- —Brightness: 4,000 nits (semi-outdoor) → 6,500 nits (direct sun)
- —Up to 10,000 nits available on request
- —IP rating: IP65 front & rear (Square) · IP66 (FO Series)
- —Operating temp: -20°C to +60°C
- —Service: front access & rear access both available
- —Roadside & rooftop LED billboards
- —Building & retail facade LED screens
- —DOOH advertising networks
- —Transportation hubs (airports, stations)
- —3D naked-eye LED billboard
- —Stadium & venue outdoor screens
FIVE QUESTIONS
EVERY OUTDOOR BUYER
ACTUALLY HAS.
“I have a size and a viewing distance. What pixel pitch do I need?”
Most outdoor enquiries arrive with exactly this information — no pixel pitch, no brightness spec. That is enough. Send us your screen dimensions and the nearest viewing distance and an engineer responds same day with a complete recommendation. The rule of thumb: minimum viewing distance in metres ÷ 1,000 = maximum pixel pitch in mm. We verify this for your specific site conditions.
“Will it survive rain, dust, and heat?”
IP65 on the front face only is not sufficient for outdoor fixed installations — water enters through the rear cabinet seams. Both Square 960 and Square 1000 carry IP65 on both front and rear faces. FO Series is IP66 front and rear. Operating temperature range is -20°C to +60°C — covering Gulf region summer heat and Northern European winter. Common cathode option reduces heat generation by approximately 30%, extending component life in sustained high-temperature environments.
“How do I mount this? Can you help with the structure?”
We cannot design or fabricate steel structures — that requires a licensed local structural engineer. What we provide at no charge: cabinet layout drawings, mounting point load specifications, power distribution diagrams, and signal routing schematics — the documents your structural engineer needs to design the frame. US orders fulfilled through our distribution partner include full installation and commissioning service.
“What is the warranty and can I get parts later?”
Standard warranty is 2 years on Square 960 and Square 1000. We lock module SKU specifications across production runs — the module supplied with your order remains reorderable at the same part number. For ongoing DOOH network operators, we recommend maintaining a spare module inventory of 2–3% of total screen area to cover field replacements between reorder cycles.
“What is common cathode and does it matter?”
Common cathode technology supplies separate voltages to the red, green, and blue sub-pixels rather than a shared higher voltage across all three. The result: approximately 30% lower power consumption and meaningfully lower operating temperature at the same brightness level. In sustained high-temperature outdoor environments — particularly Saudi Arabia, UAE, and other Gulf markets — this translates to longer component life and reduced cooling requirements. Available as an option on Square 960 and Square 1000.
Both Rated
Cathode Option
°C Range
Drawings
OUTDOOR LED DISPLAY
ENGINEERING FROM BRIEF TO SITE.
The Right Spec
for Every Outdoor Site.
Brightness requirement and pixel pitch are determined by installation environment, not by preference. The table below is the starting point our engineers use when responding to outdoor enquiries.
| Environment | Brightness | Recommended |
|---|---|---|
| Semi-outdoor / covered | 3,500–4,000 nits | FO Series |
| Transportation hub / airport | 3,500–5,000 nits | FO Series / Square 960 P4 |
| Shaded outdoor / facade | 4,500–5,500 nits | Square 960 P4/P5 |
| Direct sun / billboard | 5,500–6,500 nits | Square 960/1000 large pitch |
| 3D naked-eye billboard | 6,000–6,500 nits | Square 1000 P3.91–P6.25 |
| High-brightness custom | Up to 10,000 nits | Square 960/1000 on request |
Free Mounting Drawings.
Every Order.
We cannot design or weld your steel structure — that requires a licensed structural engineer on the ground. What we provide at no charge with every outdoor order:
- → Cabinet layout drawings — exact panel arrangement, dimensions, and gap specifications
- → Mounting point load specs — weight distribution per mount point for structural engineer handoff
- → Power distribution diagram — circuit load per cabinet row, breaker sizing recommendation
- → Signal routing schematic — sending card, receiving card, and data cable path
For US orders, our distribution partner provides full on-site installation and commissioning. Contact us to confirm coverage for your location.
30% Less Power.
Longer Life in Heat.
Standard LED drivers supply one shared voltage to red, green, and blue sub-pixels. Because each colour requires a different forward voltage, excess energy is lost as heat. Common cathode supplies each colour with its own matched voltage — eliminating that waste.
The practical result for outdoor installations: lower operating temperature at the cabinet level, reduced stress on driver ICs, and measurably longer component life. In markets like Saudi Arabia and the UAE — where ambient temperatures exceed 45°C for months at a time — this is a meaningful difference, not a marketing claim.
Common cathode is available as a factory option on Square 960 and Square 1000. Specify at order stage — it cannot be retrofitted.
OUTDOOR LED PANELS
FOR EVERY INSTALLATION.
Three series covering fine-pitch semi-outdoor to large-format direct-sun billboard — with a clear decision logic between them.
- High-end billboard or landmark project
- Fine pitch required (P2.97–P4.81)
- 1m×1m cabinet preferred
- Premium finish, fewer visible joins
- Standard billboard or DOOH network
- P4–P10, viewing distance 4m+
- Best price-per-sqm in outdoor range
- Traditional 960mm cabinet format
- Fine pitch outdoor: P1.2–P2.5
- Semi-outdoor or covered installation
- IP66 dual-face, close viewing distance
- Transportation hub, retail facade
Square 1000
High-end outdoor platform built on a 1m×1m cabinet format. Multiple cabinet sizes available (1000×500 / 1000×750 / 1000×1000 / 1500×1000mm) for flexible screen dimensions. Fine pitch options from P2.97 for landmark and close-viewing facade applications.
Square 960
The volume outdoor platform. Traditional 960×960mm cabinet format preferred by integrators and DOOH network operators worldwide. P4 through P10 range covers all standard billboard and facade viewing distances. Best price-per-sqm in the outdoor range.
FO Series
Fine pitch outdoor platform for close-viewing semi-outdoor applications. SMD GOB technology with IP66 dual-face protection — the highest IP rating in the range. Designed for transportation hubs, covered retail facades, and outdoor kiosk-scale installations where pixel clarity at sub-5m viewing distance matters.
REAL PROJECTS.
REAL INSTALLATIONS.
Custom Shaped LED — Tokyo
Buyers searching for an LED cylinder, LED column, LED ring, or flexible LED display usually want a known...
READ CASE STUDY
Triple-Fold Block Reception — Shenzhen
A digital media company opening a new Shenzhen headquarters needed a reception screen that looked like a bespoke...
READ CASE STUDY
Suspended Circular LED Display
A local company's activity center in Bangkok's CBD — a compact stage area — wanted a 3-meter borderless...
READ CASE STUDY
WHICH OUTDOOR LED
IS RIGHT FOR YOUR PROJECT?
Including when the value series is the correct choice — and when the premium platform earns its price.
| Specification | Square 1000 | Square 960 | FO Series |
|---|---|---|---|
| Pixel Pitch | P2.97–P10.41 | P4–P10 | P1.2–P2.5 |
| Cabinet Size | 1000×1000mm (multi-size) | 960×960mm standard | 480×540mm |
| Peak Brightness | 5,500–6,500 nits | 5,500–6,500 nits | 3,500–4,000 nits |
| 10,000 nits | On request | On request | — |
| IP Rating | IP65 front & rear | IP65 front & rear | IP66 front & rear |
| Common Cathode | Optional | Optional | — |
| Service Access | Front & rear | Front & rear | Front only |
| Operating Temp | -20 to +60°C | -20 to +60°C | -20 to +50°C |
| Lead Time | 25–35 days | 20–30 days | 25–35 days |
| Best For | Premium billboard, landmark, fine-pitch facade | Standard billboard, DOOH network | Semi-outdoor, close viewing, transit hub |
OUTDOOR LED DISPLAYS
DEPLOYED ACROSS FOUR CONTINENTS.
“Saudi Arabia advertising company, 20 screens, 15×6m each. Square 960 P10 with common cathode specified for the Gulf heat. Mounting load drawings for each site, delivered before we started production. They’ve been running continuously for over a year with no field calls.”
Every outdoor order is reviewed by our in-house engineers before production. Same-day engineer response, engineer-to-engineer. Send us your screen size and viewing distance and we handle the rest.
Served
Experience (Yrs)
Both Rated
DAY
Response
“Almost every outdoor enquiry we receive says the same thing: here is the screen size, here is the viewing distance. That is genuinely enough to work with. Pixel pitch is a calculation — distance divided by a constant. Brightness follows from the installation environment. What actually takes engineering judgement is the mounting load documentation, the power circuit sizing, and the common cathode decision for hot climates. We provide all of that with every quote, at no charge — because the integrator on-site needs those documents to do their job, and most suppliers do not supply them.”
OUTDOOR LED DISPLAY:
QUESTIONS BEFORE YOU SPECIFY.
What Is a 3D Naked-Eye LED Display?
A 3D naked-eye LED billboard uses an L-shaped or curved screen configuration — typically two display faces at a 90° corner — combined with anamorphic content produced specifically for that geometry. When viewed from the correct angle, the forced perspective creates the illusion of objects extending beyond the screen surface, without requiring glasses or special equipment.
The display hardware itself is standard outdoor LED — the effect is entirely content-driven. Key requirements: high brightness (6,000–6,500 nits minimum) for outdoor visibility, precise corner alignment between the two faces, and refresh rates high enough to avoid banding in video content. Square 1000 P3.91–P6.25 is the recommended platform for 3D naked-eye applications given its large-format cabinet and precise corner assembly options.
The anamorphic content must be produced by a specialist content studio — this is typically the larger cost and timeline item compared to the display hardware itself.
Running Multiple Screens Across Multiple Sites?
DOOH network operators have different requirements from single-site buyers. The priorities are SKU consistency across the network, long-term spare parts availability, and a supplier who can fulfil repeat orders at the same specification years after the initial deployment.
We lock module SKU specifications across production runs — the panel you deploy in site 1 today will match the panels you add to site 20 in three years. Our Saudi Arabia DOOH client has been reordering at the same specification since 2023 across 20 city-centre locations with no SKU substitutions.
TECHNICAL GUIDES
FOR OUTDOOR SPECIFIERS.
What Is an All-in-One LED Display? Uses & Key Checks
An all-in-one LED display is a direct-view LED screen that combines the display panels, power supply and display...
Read Case Study
HDR400 vs HDR10: HDR400 Is Entry-Level — What Differs
Buyers often mix up HDR400 and HDR10. HDR400 is an entry DisplayHDR brightness tier (~400 nits). HDR10 is...
Read Case Study
QLED vs UHD: Not Rivals — One Is a Panel, One Is a Resolution
QLED and UHD are not rivals. QLED describes how a panel makes colour (quantum-dot LCD). UHD describes pixel...
Read Case Study